The Chase Edge BMX racing bicycle has been one the most sought after bikes to get started on the track over the past few years, and the newly revised 2016 Chase editions can help give you the edge needed to you take it all the way to the top of the podium!
We turned things up a notch with an all new look. The 2016 Edge is looking stunning with a Gun Metal Grey Finish with Red and Black accents helping you stand out off the track, as much as you will be on it! The hydroformed frame never looked so good.

WEIGHT : 9.9 pounds / 4,5 Kg Without Pedal
RIDER SIZE : >3’3″ – 3’5″ / >1m – 1m05

2016 edge walking bike key Features

FRAME : Chase Edge Frame Walking 12.5″ Top Tube Hydroformed
FORK : Chase Edge Full Cr-mo Fork
HEADSET : Integrated Sealed Bearing
HUBS : 16H, Double Contact Seals Bearing
RIMS : Single Wall 16H 12″x1.75″
TIRES : Kenda Kontact 12″x2.25″
SEAT : Chase Edge Mini Combo

SPECIFICATIONS

FRAME
Chase Edge Walking 12.5″ Top Tube 6061 T6 Alloy Hydroformed, Integrated Head Tube, 1″, Water Decals
FORK
Chase Edge Full Cr-mo, 1″ Steer Tube
HEADSET
Integrated Sealed Bearing
HANDLEBAR
Chase Edge Bar 1.18″ Rise, 6° Back Sweep & 0° Up Sweep
GRIPS
Insight C.G 115mm, PVC End Plug
STEM
Chase Edge 40mm 6061 T6 Alloy Laser Etched Logo
FRONT HUB
Mini Hub, 16H, Double Contact Seals Bearing, 3/8″ Axle/Nuts
REAR HUB
Mini Hub, 16H, Double Contact Seals Bearing, 3/8″ Axle/Nuts
SPOKES
14 Gauge
NIPPLES
Brass Nipples
FRONT RIM
Chase Edge 012 Single Wall 16H 12″x1.75″ Schrader Valve
REAR RIM
Chase Edge 012 Single Wall 16H 12″x1.75″ Schrader Valve
FRONT TIRE
Kenda Kontact 12″x2.25″
REAR TIRE
Kenda Kontact 12″x2.25″
TUBES
12”x1.5″-1.75″ Schrader Valve
SADDLE
Chase Edge Mini Combo
SEAT POST
Chase Edge Mini Combo 25.4x150mm
SEAT CLAMP
Chase Edge Integrated On The Frame

GEOMETRIES

Frame Size TT CS min LR AF SA HT SPL BBH Wheels
Walking bike 12.5″
311.15 mm
8.5″
207 mm
1.8″
46 mm
70° 71° 3.35″
85 mm
5.6″
142 mm
6.6″
167.6 mm
12×1.75″
Micro 16.25″
412.7 mm
10.85″
275.6 mm
1.8″
46 mm
71° 69° 4″
100 mm
8.26″
210 mm
9.75″
247.6 mm
18×1″
Mini 17.25″
438.15 mm
12.25″
312 mm
1.8″
46 mm
72° 70° 4″
100 mm
8.8″
225 mm
10.6″
269.2 mm
20×1-1/8″
Junior 18.75″
476.25 mm
12.5″
317.5 mm
1.8″
46 mm
73° 72° 4″
100 mm
8.8″
225 mm
10.6″
269.2 mm
20×1-1/8″
Expert 19.75″
501.65 mm
13″
330.2 mm
1.8″
46 mm
73° 72° 4″
100 mm
8.8″
225 mm
11″
279.4 mm
20×1-3/8″
Expert XL 20″
508 mm
13.5″
353 mm
1.8″
46 mm
73° 72° 4″
100 mm
8.8″
225 mm
11.5″
292.1 mm
20×1.50″
Pro 20.5″
520.7 mm
14″
355.6 mm
1.8″
46 mm
74° 72° 4.33″
110 mm
9.4″
238 mm
11″
279.4 mm
20×1.75″
Pro XL 21″
533.4 mm
14.15″
359.4 mm
1.8″
46 mm
74° 72° 4.33″
110 mm
9.3″
238 mm
11.5″
292.1 mm
20×1.75″
Cruiser 21.5″
546.1 mm
14.5″
368.3 mm
1.8″
46 mm
74° 71° 4.7″
120 mm
10.6″
270 mm
12″
304.8 mm
24×1.75″

TECHNOLOGIES

Chase Bicycles utilizes tapered tubing to offer you the most durable, yet light weight products, to help you achieve optimum results on the BMX race track. Our tapered items, use multiple thicknesses in the same tube, so the tube can be reinforced where needed with precision to help reduce stress areas where needed and lighten up the areas that don’t require extra materials. In aluminum the result are tube walls that eliminate stress points, boosting strength, reducing weight and improving fatigue life. The advantage is clear : Tapered tubes enhances strength and durability, at less weight.

Hydroformed tubes have two main advantages. First, the narrow axis is a flatter surface, which means more surface area to carry the load, so it is stiffer & stronger across the minor axis. Secondly, the deeper axis is stiffer since the stiffness varies to the cube of the diameter, stronger to the square. When using an oval shaped tube on a typical BMX frame it helps reduce flex but only in one direction, but on the Chase frames, the tubes are oval in both directions in the main flex areas and these tubes help reduce flex in both main directions.

Born from some of the best alloys for building BMX race bikes, our special 7005-T6 SpeedLite alloy is the perfect blend for our Hydro-forming process, giving the Element frames the core strength needed to produce unmatched speed on the track, while keeping the overall weight of the frame down to a minimum.

While each rider is unique, Chase Bicycles has developed Bio Fit sizing for our frames to offer riders the ultimate size options for BMX racing. The sizing used for the Chase line has been carefully designed to give riders the optimum power output in the size range offered. Our commitment to details and offering many size options, gives you a custom fit BMX frame, that you can buy right at your local Chase BMX Dealer.

Using the Chase R&D team race approved CNC’d dropouts on the Edge frame helps make the back end of the bike stiffer.